SIMRIG motion SR1

  • 42 495 kr

Nyhet hos oss! Svenska SIMRIG SR1 motionsystem för simulator.

KÖP NU!
Artikelnummer: SR1-084-00-E
Dela


Svensktillverkade SIMRIG SR1 motionsystem för simulator.

Ca 4-6 veckor leveranstid.

Senaste drivrutiner och mjukvara

SIMRIG Control Center

SIMRIG SR1 Manual

SIMRIG SR1 is compatible with aluminum rigs built using 60x20, 40x40, and 80x40 mm aluminum extrusions. Other sizes are available on request.

Four 20x20 mm aluminum profiles and four plastic brackets are required to attach SIMRIG SR1 to an aluminum rig. These are included when your order a system.

The four 20x20 mm aluminum profiles are mounted in pairs. Two at the front of the rig and two at the back. Each pair holds two SIMRIG SR1 actuators. See documentation for more details.

The plastic brackets are specifically designed to attach to either 60x20, 40x40, or 80x40 mm aluminum profiles. These profiles differ in height and therefore require a matching bracket. Please specify which rig you intend to use while ordering.

Power Supply

The power supply operates around the world. It works with 100-240 V at 50-60 Hz.

Maximum Load

For best performance, longevity, and user experience, the maximum load is set to 175 kg. The maximum load includes the SIMRIG SR1 motion system, the rig, the driver, other peripherals, and additional weight actuated by the SIMRIG SR1 motion system.

When the SIMRIG SR1 is attached to a lightweight rig, such as the SRD-MOTUS ULTIMATE (it only weighs 21 kg) there is about 154 kg left for driver, seat, and peripherals.

Noise

The sound-level of the SIMRIG SR1 is motion system is very low. A large rubber pad is attached to the bottom of each actuator. This keeps the system stationary and absorbs vibrations. Furthermore, the power supply is fan-less.

What is in the box?

A complete motion system:

  • 4x SIMRIG SR1 Linear Actuator
  • 1x SIMRIG SR1 ECU
  • 1x 500W Power Supply (100-240V)
  • 1x Emergency Stop
  • 4x Linear Actuator Cable (1m)
  • 1x Power Cable (C13)
  • 1x USB Cable (3m)
  • 1x Low Voltage Power Cable (2m)
  • 1x SIMRIG Control Center (download)
  • Assorted screws and T-nuts

And mounting brackets for your choice of rig:

  • 4x SIMRIG SR1 Bracket
  • 4x Aluminium Profile 780x20x20 mm
  • 4x Aluminium Angle Brackets
  • 4x Profile Cover
  • Assorted screws and T-nuts